STEP 2 - Control4 Programming Instructions

Here are the instructions on how to program Slingbox into your system. The main driver for this solution is pre-loaded on the Slingbox firmware. This tutorial assumes the larger system includes a video/audio matrix switch. The Control4 Controller must be an HC200, HC300 or HC500. This solution will give you access to all sources, including OSD, from a remote location.

Create Slingbox Room

IR Masking : None

Add SlingBox TV

Add any television with a Component Video Input in it.

This is what you should end up with.

Connections for SlingBox Room

Connections for SlingBox TV

Advanced Programming

There are 6 Buttons that are not automatically mapped in Programming. They are mapped to Custom IR Codes in Programming. Here is the Map

Custom Buttons

RED 301
GREEN 302
YELLOW 304
BLUE 305

WATCH 310
LISTEN 311

To gain access to the Custom IR Code code In Programming Click the Room SlingBox and select the coresponding Custom IR Code in the Programming Section.

Sample Red Button Programming

Here is a sample code A (Red) for a Cable Box / Kalidescape

Printable View a printable version of the current page.