Skip to end of metadata
Go to start of metadata

Alarm Panel Integration Overview

The automation system CytexOne is installing is capable of 'speaking' with an alarm system. CytexOne will work with client supplied alarm system integrators to pick out equipment that is suitable for the system.

In general, the automation system communicates with the alarm panel via RS-232 (serial) or IP standards. Most alarm panels require an extra piece installed into the system (sometimes called an RS-232 interface, sometimes called an automation module) that adds an RS-232 or RJ45 port to the panel itself. It is the requirement of the client supplied alarm company to provide this piece and program it correctly into the system. CytexOne will connect a wire from that interface module to the larger automation system to provide advanced features such as 'ARM/DISARM/STAY' etc from any touchscreen or remote in the house.

Compatible Alarm Systems

DSC Powerxxx and PCxxxx Series
DSC IT-100 PCxxx/Powerxxx Series
DSC Maxsys
Elk M1 / M1 Gold
GE Advent
GE Concord
GE Networx NX-8E
HAI Omni
HAI Omni II
HAI Omni LT
HAI OmniPro
HAI OmniPro II
Honeywell Ademco Vista 128BP (Cannot Emulate Keypad)
Honeywell Ademco Vista 250BP (Cannot Emulate Keypad)
Honeywell Ademco Vista 128FBP
Honeywell Ademco Vista 250FBP
Honeywell Apex Destiny 6100 (single partition)
Honeywell Apex Destiny 6100 (split arming)
ADT/Honeywell Vista-ICM

Will This Work with Our System?

DMP (has serial port on it...crestron has a driver)
Bosch DX4010I (has a Crestron panel)

Labels
  • None